History 1

As you consider your business needs for suppliers or contract manufacturing partners, we would like you to consider InSource.


History 2

1997 Something out of Nothing

Family Business opens in a 2,500 sq. ft. facility. Builds 1 product (Refrigerant Identifier) and provides contract engineering services for 1 customer while employing 10.

InSource opened a contract manufacturing business on Jan. 1, 1997 in a 2,500 sq. ft. facility. In our first year, we built a single product and did engineering work for 1 customer while employing 10. It included electronics, wiring harnesses, and was used in the refrigeration market.
InSource has chosen not to pursue our own product line, but rather perform services for OEMs who have product specifications and sales/distribution. It is a strong point with our customers that we are not their competitors. InSource is privately held.

History 3

1998 New Addition, New Products

Added 9,000 sq. ft. manufacturing space and 4 new products went into production after engineering re-design.

InSource expands manufacturing operation by building a 2nd attached pole building adding 9,000 sq. ft. The one product built in 1997, tripled forecast! Our customer hired us to re-design the Refrigerant Identifier and 3 models of charging scales. All of these products went into production.

History 4

1999 Wiring Harnesses, Software Engineering, Electronic Instruments

Builds Wire Harness Assemblies for our 1st Wire Harness Customer. Engineering adds Embedded C Software Capabilities. Start production of Electronic Instruments such as Leak Detectors and Vacuum Gauges.

InSource adds Electronic products including refrigerant leak detectors, vacuum scales and control panels. Software engineering support becomes the key to unlocking more opportunities. InSource starts building their own wire harnesses and cables. We purchased a small business with one steady customer besides serving our own needs. The voyage to reduce dependence on one customer begins.

History 5

2001 Box Build Electronics

Begins assembly of electronic products that controls light/siren function in the specialty vehicle market. Vertical integration into PCB assembly reduces overall lead time.

InSource secures another Electronic customer to broaden out our base. This product involves PCB Assembly with wire harness integration into an enclosure. It is 100% tested with end of line test equipment. Visual inspection on key points are also included.

History 6

2002 Chassis Harnesses

Begins supplying custom cable and wire harness assemblies to a local ambulance manufacturer. Later “added value” is provided by kitting harness packages for specific trucks to aid in customer efficiency.

InSource purchased ultra-sonic splicing equipment to replace butt connectors. We secured business that required it and have offered it to multiple customers since. This UL recognized form of connecting wires increases reliable of a spliced joint. We build large, custom cable and wire harness assemblies used in ambulance chassis. InSource provides a kit for each truck at the station specified by the customer.

History 7

2004 Copper Tube Fabrication

Begins to supply copper tubes and brazed assemblies to the refrigeration/specialty tools industry. Our pattern has been to embrace adding capabilities to meet the needs of OEM’s. This complimented our Refrigerant hose assembly line.

InSource responded to our customers request to bend and braze copper tube assemblies. Our costs were much lower and quality much higher than the current supplier. This complimented our fluid transfer offerings as we already built refrigerant hose assemblies. The process is the same with cutting to length and adding connections.

History 8

2006 Hardware Engineering

Adds In-House Schematic Creation and Board Layout. Over the years we have seen value in investing in our Engineering capabilities.

InSource provide hardware engineering services and support for products that we build. We keep costs low and design with manufacturability in mind. These services have allowed us to avoid production delays when component parts become hard to find. Each design is controlled by the OEM, supported by InSource.

History 9

2007 Product Launch

Embedded Design Engineering is provided to develop Electronics for Field GPS unit to customer in agricultural market. Product Launch a major success and InSource begins production. Our specialty and experience is Design to Build.

InSource was asked to manage the design on a major product launch for an electronic system to monitor seed corn placement in the field. The first beta run launched into production and termed a “success”. This customer has been the largest contributor to our success since 2007.

History 10

2009 Wire Harness Technology

Automatic termination added to wire processing machines. Laser Etching of Connectors and Braided Looming of Harnesses. Investment in Technology increases design options and consistency!

InSource continues to expand wire harness building capabilities with potting, nylon loom braiding, laser etching, and automatic terminal crimping. We decreased cost and increased consistency…making us more valuable for wire harness customers. Wire harness design services are offered to current customers. InSource divided into 2 business units to better serve customers. Each business unit could focus on their customers and respond quickly to their needs.

History 11

2010 SMT Board Production

Investment made to SMT Circuit Board Capabilities to better control lead time. Production Capacity increases while product defects are decreased.

The value of InSource electronics extends beyond PCB Assembly. After exhausting 8 PCB suppliers in 14 years, we purchased equipment to build our own. Review of component shortages and managing seasonal demand were the initial reasons. Better pricing, more control over production, and reduced lead times and quality defects help keep our Box build assemblies competitive.

History 12

2011 Plastic Injection Molding

Capabilities are added for Injection Molding. Improvement in reliability and waterproofing of connectors.

InSource brings value to OEMs with weatherized over molded connections. We have in-house Plastic injection molding equipment and engineering to support custom tooling designs. Many standard sizes and connections are already available.

History 13

2012 Programmable Logic

Added Robotic Thru-Hole Soldering. CNC small copper tube bender.

InSource invests in reliability and innovation to ensure proper soldering by adding robotic thru-hole soldering. We added a CNC tube bender to ensure accurate lengths and bends and minimizing setups. Each opportunity to reduce steps and operator error is a benefit to our customers.

History 14

2014 Condensing Units

Standard and Custom condensing units are built for reliability.

InSource begin producing a line of standard condensing units in addition to custom. Our units utilize market leading compressors and coils.

History 15

2015 3rd Business Unit, Upgrade Inspection Equipment

Launched Wire Harness business unit and added SPI to SMT line.

Assembly Solutions becomes Refrigeration and Controls Solutions become Electronics and Wire Harness. 3 business units are developed to promote small teams and focus to customers. Each business unit has production, engineering, quality, and materials management working together. Solder Paste Inspection (SPI) is added pre-placement in the SMT line to reduce failures as part become smaller and BGA’s are used.

History 16

2016 Enhance Business Systems

Production facility at 60,000 sq. ft. with 125 employees. Received ISO9001:2008 certification in December. Founder and President retires. InSource sees major change as the founder retires with 20 successful years as the President. Many business decisions have made it possible for a smooth transition. Growth from 10 to 125 employees and 2,500 to 60,000 sq. ft. happens with careful planning and persistently holding to core values. “If you do the right things, the right things happen”. ISO9001:2008 certification show our commitment to “doing the right thing”.

History 17

2017 Leadership Change

New President/CEO begins. Better Planning Systems initiative launched. Employment reaches 200. InSource continues founders core values with generational leadership change. Former president writes history book, “InSource: The First 21 Years.” Better Planning Systems involve application development with internal software skills that use technology to increase efficiency. Software engineering services are discontinued.

History 18

2018 Building for the Future

Begin construction of another 12,000 sq. ft. of Production. Expanding into current markets. SEDEX registration, ISO9001:2015 certification. Launched QRM in Harness business unit. 3rd SMT line in Electronics.

InSource added 12,000 sq. ft. to support product launches and future growth. We have increased our presence in all major markets served: Agricultural, Forestry, Fire, Rescue and HVAC. ISO9001:2015 certification and SEDEX registration completed. Harness launch Quick Response Manufacturing (QRM) to reduce lead time and increase throughput. 3rd SMT line and conformal coating added in Electronics.

History 19

2019 Industry Associations

Joined NTEA (Work Truck Industry) and NRA (National Restaurant Association) to support key industries that we serve. Electronics and Harnesses that are 12-24v mobile, rugged, weatherized. Refrigeration in Food Service equipment.

InSource joined NTEA, the Work Truck Industry in May 2019. Our expertise in electronics and harnesses that are 12-24v, rugged, and weatherized serve this industry well. InSource joined NRA, National Restaurant Association in May, 2019. Our expertise in refrigeration for food service equipment serve this industry. With changes that will use Hydrocarbon and other natural refrigerants, like R290A, and R600a; many companies are needing help designing and building Refrigeration services.